| Home | About Beartech Alloys | Literature Download | Contact Us | Staff Log In |


Call 877-232-7832 for your metal alloy needs!

 

Leaded Tin Bronze Alloys - C92700

Standard Alloys

Leaded Tin Bronze Alloys

Leaded Red Brass Alloys

  • C83600
  • C83800
  • C84200
  • C84400
  • C84800
  • C85700

Manganese Bronze Alloys

  • C86200
  • C86300
  • C86500

Aluminum Bronze Alloys

  • C95200
  • C95300
  • C95300HT
  • C95400
  • C95400HT
  • C95410
  • C95410HT
  • C95500
  • C95500HT
  • C95510HT
  • C95520HT
  • C95800
  • C95900

High Tin Bronze Alloys

  • C90300
  • C90500
  • C90700
  • C90800
  • C90810
  • C91000
  • C91100
  • C91300
  • C91600
  • C91700

High Lead Tin Bronze

  • C93400
  • C93500
  • C93600
  • C93700
  • C93800
  • C93900
  • C94000
  • C94100
  • C94300
  • Bronze Family: Leaded Tin Bronze
  • Solids: 1/2" to 13" OD
  • Tubes: 1" to 16" OD
  • Rectangles: Up to 20"
  • Standard Lengths: 144"

Typical Uses

  • Fasteners Lead Screw Nuts
  • Industrial Gears, Pump Impellers, Bearings, Heavy Duty Bearings, Pump Pistons, Bushings, Steam Fittings

Similar or Equivalent Specification

CDA ASTM ASARCON SAE AMS Federal Ingot# Military Other Desc
C92700 ASTM B505 102 SAE 63     206   LEADED TIN BRONZE
      SAE J461          
      SAE J462          

Chemical Composition (according to ASTM B505-08)

Cu% Sn% Pb% Zn% Fe% Ni% Sb% P% S% Al% Mn% Si%
Note: Single values represent maximums.
  • A In determining copper minimum, copper may be calculated as copper plus nickel.
86.00-89.00 9.00-11.00 1.00-2.50 0.70 0.20 1.00A 0.25 1.5 0.05 0.005 N/A 0.005

Mechanical Properties (according to ASTM B505-08)

Tensile Strength (min) Yield Strength (at .5% extention under load min) Elongation (in 2in. or 50mm min, %) Brinell Hardness (min) Remarks
Ksi MPa Ksi MPa
38 252 20 138 8 N/A  

Machinability

Alloy Rating Density
C92700 45 0.317

Physical Properties (provided by CDA)

US Customary Metric
Melting Point - Liquidus 1800 F 982 C
Melting Point - Solidus 1550 F 843 C
Incipient Melting 600 F 316 C
Density 0.317 lb/in3 at 68 F 8.78 gm/cm3 @ 20 C
Specific Gravity 8.780 8.78
Electrical Resistivity 940 ohms-cmil/ft @ 68 F 15.63 microhm-cm @ 20 C
Electrical Conductivity 110 %IACS @ 68 F 0.064 MegaSiemens/cm @ 20 C
Thermal Conductivity 27.20 Btu · ft/(hr · ft2·°F)at 68F 47.0 W/m · °K at 20 C
Coefficient of Thermal Expansion 100 ·10-6 per oF (68-392 F) 18.0 ·10-6 per °C (20-200 C)
Specific Heat Capacity 0.090 Btu/lb/°F at 68 F 377.1 J/kg · °K at 293 K
Modulas of Elasticity in Tension 16000 ksi 110000 MPa

Fabrication Properties (provided by CDA)

Joining Technique Suitability
Soldering Excellent
Brazing Good
Oxyacetylene Welding Not Recommended
Gas Shielded Arc Welding Not Recommended
Coated Metal Arc Welding Not Recommended

Thermal Properties (provided by CDA)

Treatment Temp./Time - US Temp./Time - SI
Stress Temperature 500 260
Solution Minimum    
Solution Maximum    
Solution Time 0.0
Solution Medium None
Precipitation Value    
Precipitation Time    
Precipitation Medium None
Annealing Minimum    
Annealing Maximum    
Annealing Time
Hot Works Minimum    
Hot Works Maximum    
   

See what an honest, hard-working metal distributor can do for you.
Call or email us today.

BEARTECH ALLOYS, Inc.
(877) 232-7832 Toll Free
(714) 550-1700 * (714) 550-1710 Fax
910 S. Placentia Ave, Suite A
Placentia, CA 92870